Product Description
|
Item
|
Unit
|
Index
|
|
Density
|
g/cm3
|
3.2
|
|
Moh’s hardness
|
Grade
|
9
|
|
Vickers Hardness (Hv50)
|
HV0.5
|
>1550
|
|
Modulus of Elasticity
|
Gpa
|
290
|
|
Flexural Strength
|
Mpa
|
>600
|
|
Compressive Strength
|
Mpa
|
2500
|
|
Maximum use temperature
|
°C
|
1200℃
|
|
Thermal Conductivity
|
W/(m.k)
|
15-20
|
|
Thermal Expansion Coefficient
|
10-6/°C
|
>3.1
|
|
Dielectric Strength
|
KV/mm
|
15
|
|
Volume Resistivity at 20°C
|
Ω.cm
|
1.0X1012
|
|
项目
Item
|
单位
|
常压烧结碳化硅
SSIC
|
反应烧结碳化硅
RBSIC/SISIC
|
重结晶烧结碳化硅
RSIC
|
|
UNIT
|
DATA
|
DATA
|
DATA
|
|
|
最高使用温度
Max temperature of Application
|
℃
|
1600
|
1380
|
1650
|
|
密度
Density
|
g/cm3
|
＞3.1
|
＞3.02
|
＞2.6
|
|
气孔性
Open Porosity
|
%
|
＜0.1
|
＜0.1
|
15%
|
|
抗弯强度
Bending Strength
|
Mpa
|
＞400
|
250(20℃)
|
90-100(20℃)
|
|
Mpa
|
|
280(1200℃)
|
100-120（1100℃)
|
|
|
弹性模量
Modulus of Elasticity
|
Gpa
|
420
|
330(20℃)
|
240
|
|
Gpa
|
|
300（1200℃）
|
|
|
|
热传导系数
Thermal Conductivity
|
W/m.k
|
74
|
45(1200℃)
|
24
|
|
热膨胀系数
Coefficient of Thermal Expansion
|
K-1x10-6
|
4.1
|
4.5
|
4.8
|
|
维式硬度
Vickers Hardness HV
|
Gpa
|
22
|
20
|
|
|
耐酸碱度
Acid Alkaline-proof
|
|
优（excellent）
|
优（excellent）
|
优（excellent）
|
Introduction
SiC ceramics not only have excellent mechanical properties at room temperature, such as high bending strength, excellent oxidation resistance, good corrosion resistance, high wear resistance and low friction coefficient, but also high temperature mechanical properties (strength, creep resistance, etc.) are the best known ceramic materials.
Hot pressing sintering, non-pressing sintering, hot isostatic pressing sintering materials, its high temperature strength can be maintained to 1600℃, is the best high temperature strength of ceramic materials. The oxidation resistance is also the best of all non-oxide ceramics. Another name for emery. SiC ceramics have been widely used in petroleum, chemical industry, microelectronics, automobile, aerospace, aviation, paper making, laser, mining and atomic energy.
Silicon carbide has been the most widely used material for the use of structural ceramics.Silicon carbide has high hardness, good wear resistance, strength and toughness, heat resistance, corrosion resistance and a series of excellent properties, especially its high hardness and wear resistance, even at 800℃ temperature is basically unchanged, at 1000℃ still has a very high hardness.
Characteristics such as relatively low thermal expansion, high force-to-weight radius, high thermal conductivity, hardness, resistance to abrasion and corrosion, and most importantly, the maintenance of elastic resistance at temperatures up to 1650 ° C, have led to a wide range of uses.
Features
★High insulating properties, large specific heat capacity
★Good chemical stability, high specific surface area, low pressure drop
★Resistance to thermal shock, small thermal resistance, good thermal conductivity
★High temperature resistant and mechanical strength
★Resistant to corrosion, good heat-shock resisting ability
Advantages
★ Superior thermal shock resistance
★ Good fracture toughness
★ Mechanical fatigue and creep resistance
★ Excellent non-wetting property with good oxidation resistance
★High Chemical Resistance
★Corrosion resistant
★Lightweight – Low Density
★High Temperature Strength
★Low thermal expansion
★Excellent thermal shock resistance
Silicon Nitride Ceramic
Sand blast silicon carbide nozzle advantages:
★Good performance property of abrasive resistance, corrosion resistance, stable property performance and long service life
★Customized nozzels are available according to your drawing and application
★Silicon carbide, Boron carbide and tungsten carbide nozzles are all acceptable
★Excellent thermal, mechanical and chemical stability
★Ideal for use as small, precision components
★No deformation
★No softening
★No loose expansion under high temperature
Applications:
* Precision components in furnaces
* Testing equipment
* Mechanical test fixtures
* Semiconductor wafer processing equipment
Silicon carbide ceramic is widely used in automobile, mechanical and chemical industry, semiconductor, space technology, microelectronics, energy, paper making and other fields, has become an ideal material for severe conditions of high temperature and pressure, corrosion and abrasion
Silicon carbide (SiC) is a lightweight ceramic material with high strength properties comparable to diamond. It has excellent thermal conductivity, low thermal expansion, and is resistant to corrosion from acids. Silicon carbide is an excellent ceramic material for applications requiring good erosion and abrasive resistance. Consequently, it is useful in a variety of applications including spray nozzles, shot blast nozzles and cyclone components.
|
Item
|
Silicon Carbide Water Valve Disc
|
|
Material
|
Silicon Carbide
|
|
Size
|
Customized, according to your drawing
|
|
Payment
|
TT, Western union, Credit Card
|
|
Packing& Shipping
|
1. Each item is wrapped with oppbag and protective air bubble 2. Then put into the box/Pack with strong Cartons for shipping
3. We use different packing methods according to different products, or we can use customized packing.
|
Company Profile
Jiangsu Zitai Co.Ltd
1.A professional Team!
Zitai have a full service include ceramic forming,molding design and development, precision machining and precision detection technology and we have a professional techincal teams and our engineer works in this line more 20years. We are good at listening and understanding your real needs and can provide exclusive personal customization!
2.A good listener!
Take the good faith as the book, strives for the survival by the quality, serves the quality to win the customer trust,maitain the spirit of innovation and development, thoughtful after-sales service enterprises as the goal.
3.Professional production equipment
We have dozens of professional equipment in line with EU production standards.Can be customized with your different production needs, different materials for production. Due to the high operation of the equipment, the production cycle can be greatly shortened.
4.Rigorous inspection process
We will be in the production of products after the professional technical personnel for product quality review and tolerance measurement. To ensure that the products sent to your hands are the best quality products.
FAQ
Q：Are you a manufacturer or trading company ?
A：We are professional manufacturer and supplier in China.we have a professional technical team in this line.
Q：What’s the MOQ?
A：There is no limit on quantity, the quantity is more,the price is better.
Q：Do you accept customized dimension?
A：Yes, we can produce ceramic parts per customer’s drawing.
Q：Can you supply a free sample?
A：We can supply a free sample to you within 3 days when we have an exsited size in our stock and the freight is collect.
We always send the sample before the mass production and keep the quality of the bulk goods is consistent with that of the sample.
Q：What about your after-sales service?
A：We have strict and professional QC team. We are always offering qualified products.
If the quality can not meet requirement, we will reproduce the qualified products or refund the payment.
Q：What is your payment term?
A：We mainly accept T/T, West Union, Credit card and L/C at sight.
Paypal will be available in the near future.
Reviews
There are no reviews yet.